Airfiltech

HEPA Filters in Pharmaceutical Cleanrooms: Types, Mechanisms & GMP Compliance

In pharmaceutical manufacturing, a single airborne dust particle can become a serious risk to product quality and patient safety. Dust, microorganisms, or chemical particles carried by airflow into the production area can compromise an entire batch of sterile product. This is exactly why the HEPA filter (High-Efficiency Particulate Air) plays a central role in protecting […]

Air Filtech Joins the National Student HVAC Design Competition

On August 26, 2026, representatives from Air Filtech Joint Stock Company attended the press event for the 2026 National Student HVAC Design Competition (VSDC 2026), held as part of HVACR Vietnam 2026. As Principal Sponsor, Air Filtech used the occasion to share its journey developing air filtration technology in Vietnam and to help bring international […]

BIBO Safety Filter Housings and Radioactive Filters for Hospitals: A Case Study from Cho Ray Hospital

In hospitals with a Nuclear Medicine department, the Cyclotron room is always the area demanding the strictest air control standards. This is where radioisotopes are produced for PET imaging — a process that is essential for diagnosis, but also carries a risk of radiation exposure if the air filtration system is inadequate. BIBO (Bag In […]

Air Filtech Upgrades Cleanroom Air Filtration System at Pharmaceutical Plant to EU GMP Annex 1

Air Filtech Completes Cleanroom Air Filtration Upgrade to EU GMP Annex 1 Standards for a Pharmaceutical Factory in Binh Duong Air Filtech has recently completed a comprehensive cleanroom air filtration system upgrade for a pharmaceutical factory in Binh Duong Industrial Park, enabling the system to meet the EU GMP Annex 1 (2022 revision) requirements — […]

Terminal Housing Green — Next-Generation Commercial Building Air Filtration Cutting Operating Costs by 30%

Air Filtech Introduces Terminal Housing Green — The Next Generation of HEPA Terminal Housings Air Filtech officially introduces Terminal Housing Green — the next generation of HEPA terminal housings, specially designed for HVAC systems in high-rise commercial buildings. The product is researched, developed, and manufactured in Vietnam, complies with the EN 1822 standard, and meets […]

Air Filtech Supplies Self-Cleaning Gas Turbine Inlet Filters to Ca Mau Gas Power Plant

Air Filtech Completes Installation of Self-Cleaning Inlet Filtration System for LM6000 Gas Turbines at Ca Mau Power Plant Air Filtech has completed the installation and handover of a self-cleaning Pulse-Jet inlet filtration system for 3 LM6000 gas turbine units at Ca Mau Gas Power Plant, raising the system’s total air handling capacity to 1.2 million […]

Activated Carbon Solution Helps Dong Nai Plastic Recycling Plant Fully Eliminate Odor, Meet QCVN 20

Air Filtech Deploys Odor Control Solution for a PE/PP Plastic Recycling Plant in Dong Nai A PE/PP plastic recycling plant in Dong Nai Province has successfully implemented Air Filtech’s odor control solution, putting an end to three years of environmental administrative penalties and winning back the trust of the surrounding community. The Challenge The plant […]

Oil Filters for Industrial Kitchens: 85% Reduction in Duct Fire Risk at a Shopping Mall

Grease and oil buildup in kitchen exhaust ducts is one of the leading causes of fire in commercial kitchens. For large-scale food courts with dozens of cooking stations running simultaneously, this risk multiplies — and standard filtration often isn’t enough. The Challenge A shopping mall in Hanoi operates a food court with 40 restaurant stalls […]

Why F8 Filters Save More Than F6 Over 10 Years: A TCO Analysis for an Office Building’s AHU System

A common question building investors ask: “F8 filters cost up to 40% more than F6 — why should I buy them?” The answer lies in a Total Cost of Ownership (TCO) analysis over the system’s lifecycle. Air Filtech has just published a 10-year TCO analysis report for a typical AHU system in a 20-story office […]

Dust Collection System for Welding and Metal Cutting Workshops — Choosing the Right Solution from the Start

Air Filtech has just completed the installation of a central dust collection system for a large-scale steel structure fabrication workshop in Dong Nai Province, serving 18 MIG/MAG welding stations and 6 plasma cutting stations operating simultaneously. The workshop covers a total area of 4,800 m² with an 8 m high metal roof. Before the upgrade, […]